Hobbywing Quicrun Fusion SE for Crawler 1800kv 540 Spec

Part number: HW30404317

Description
Introducing the QUICRUN Fusion SE for Crawlers from Hobbywing. A combined speed control and motor package.

Aesthetically Appealing
The Fusion SE provides an integrated space-saving design forbuilders. With a 58mm length, the Fusion SE has been shortened slightly to allow it to ﬁt into more vehicles.

FOC Powered
With proven design heritage FOC has been a game changer for the crawling segment. The extreme efﬁciency operates at lower temps and provides extended runtimes. The nearly silent operation provides amazing power and response at all speeds while providing extremely low RPM control. Compared to normal brushless, FOC systems provide a dramatic increase in response and power delivery.

The smart torque output control feature of the built-in FOC ESC ensures unmatched downhill and uphill driving. The ESC can automatically adjust the motor output to RPM to match the driver inputs.

Intelligent Torque Output
Intelligent Torque Output is a smart management system that allows the ESC to adjust the motor for inclines or descent under any load to match the throttle.

U- matched hill holding
With 8 levels of drag brake force (Power) and 9 levels of Drag Brake Rate, drivers can fine-tune their vehicle’s hill-holding power and general driving. Overall, drag brakes can be 2 times stronger than normal brushless setups.

Designed for Durability
Silicon rubber gaskets, electronic buttons, and quality hardware ensure a long life for the Fusion SE. Made to take the abuse and conditions of daily RC bashers.

Ready for all weather and track conditions.
IP-67 waterproof rating ensures the Fusion SE has protection from water, dust, and about anything else that gets thrown at it. Designed to withstand all conditions time and time again.

Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product.

Specifications
- Scale - 1/10th
- Brushed/Brushless - BL
- Sensored/Sensorless - SD
- Waterproof - Waterproof
- Cont./Peak Current - 40A
- Input Voltage - 2-3S Lipo/6-9 Cell NiMH
- BEC Output - 6V/7.4V@4A、6A peak
- Motor KV - 1200KV & 1800KV
- Diameter/length of Motor - 36mm / 58.1mm
- Shaft diameter / exposed shaft length - 3.175mm / 16.5mm
- Motor Poles - 4
Wires & Connectors
- Input Wires - Red-14AWG-200mm*1 / Black-14AWG-200mm*1
- Input Connectors - XT60
- (Note: All the wire length above is the original length not the length you see from the outside.)
ESC Programing via
- SET Button on ESC - Not Supported
- LED Program Box - Supported
- LCD Program Box - Not Supported
- OTA Programmer - Not Supported
- Program Port - Independent programming interface(switch position)
Firmware
- Firmware Upgrade - Not Supported
Size & Weight
- Size - 36X58.1mm
- Weight - 201g (including wires&connectors
Applications
- Vehicles - 1/10throck crawler

Specification

Manufacturer	Hobbywing
Part Number	HW30404317
EAN	5051294182892
Waterproofing	Waterproof
Power Rating	Upto 40 Amps
Motor Size	540
Max Lipo Volt Rating	11.1v / 3s
KV Rating (Brushless)	< 2000kv
Motor Class	Crawler
Battery Compatibility	LiPo/NiMh
Bore	3.2mm
Brushless Motor Type	Sensored
Battery Connector Type	XT-60