Absima AB3.4-V2 4WD Buggy RTR

Part number: 12222V2

Spares

Tune Ups

Description
The success story continues! We have equipped the AB3.4 "V2" with some new features that bring the vehicle to the next level of evolution.

Highlights
- NEW* 80A brushed speed controller with T-connector and 540 motor
- NEW* Programmable speed controller
- NEW* 6kg steering servo
- NEW* LED lighting
- NEW* Downforce rear wing
- NEW* even more option parts available
The new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.

The car is powered by a 540size 15T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity.

4 oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 6kg servo takes over the implementation of the steering commands.
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
- 4WD all wheel drive
- 2.4GHz 4-channel radio system
- 80A brushed speed controller with T-plug
- 540size 15T motor with 32.000RPM @ 7.4V
- 6kg steering servo (25T, ball bearings)
- Oil shock absorbers
- Ball bearing main drive
- Extremely durable composite plastic parts
- Steel differential outdrives
- Aluminum main drive shaft with steel mounts
- Adjustable upper tie rods
- 5mm aluminum motor mount
- 6mm shock towers
- 2 differentials (front/rear)
- Stylish "Cap Forward" buggy body
- "Light-Weight" chassis (less weight - longer drive time)
- Many aluminum option parts available
Tech Spec:
- Scale: 1:10
- Dimensions (L/W/H): 380x255x155 mm
- Weight: 1400g
- Wheelbase: 270mm
- Ground clearance: ca. 30mm
- Track width: 215mm front/rear
- Front wheels: Ø 88mm / Width: 33mm
- Rear wheels: Ø 88mm / Width: 42mm
- Shock absorber oil: 400CPS
- Shock absorber installation length: 90mm
- Motor ratio: pinion 23T / main gear 64T (module 0,6)
Scope of Delivery:
- 1/10 Buggy "AB3.4V2" RTR
- 2.4GHz "CR4S" radio
- Sticker sheet
- Manual
Required for Use:
- 4x AA Batteries for radio
- 7.2V NiMH or 7.4V* LiPo car battery (*recommended)
- Charger (suitable for car battery)
- Program card for individual settings of the speed controller

Specification

Manufacturer	Absima
Part Number	12222V2
EAN	4250650957445
Motor Type	Brushed
Waterproofing	Water Resistant
Drive	4WD
Surface Type	Off-Road
Assembly Type	Assembled (RTR)
Scale	1:10
Vehicle	Buggy
Skill Level	Skill Level 2 What's this?
Power Bundles	Power Bundle Required